 |
| COLORMETRY |
Colormetry
|
Water hardness is considered to be the most common factor
in damaging a boiler. The hardness level (ionic concentration) of water
inflow to a boiler usually must be checked manually by using chemical
reagents known as indicators. Manual measurement using these conventional
methods causes such problems as time consumption, personal error or deviation
and lack of continuity in monitoring hardness leakage. Colormetry solves all
these problems by offering an automatic monitoring system for sample water
collection, chemical reagent injection, mixing and evaluation.
|
SpecificationsSpecial Features Note
Contact Person : 087888297728 by Jk Ling
Specifications
Colormetry
|
|
Voltage
|
AC 24V
|
Frequency
|
20W
|
Method
|
50/60 HZ
|
Monitor Range
|
3,450 LB/HR
|
Alarm Set Point
|
Over 1 MG/L
Over 2 MG/L |
External Alarm Point
|
Alarm output capacity at contact C
: AC 24V 1A, Dry Contact
|
Operation Output
|
Open collector output capacity :
DC 24V, 70mA
|
Raw Water Pressure
|
7-70 PSI
|
Water Temperature
|
41-104 F°
|
Operation Temperature
|
41-122 F°
|
Humidity
|
20-90%RH (no condensation, no
freezing)
|
Cartridge Replacement
|
Every 4 months
|
Connector Size - Inlet
|
Ø 1/4 in. (diameter) tube
|
Connector Size - Outlet
|
Ø 5/16 in. (diameter) tube
|
Installation
|
Indoor wall mount
|
Configuration
|
5 W x 4 L x 20.6 H in.
|
Weight
|
4.6 LBS
|
0 komentar:
Posting Komentar